How to do Floor Scrubbing process

Floor Scrubbing process is an effective way to clean and maintain various types of flooring, including tile, vinyl, and hardwood. Here’s a general guide on how to perform floor scrubbing:

Thank you for reading this post, don't forget to subscribe!

Floor Scrubbing Process Materials and Equipment:

  1. Floor Scrubber or Scrubbing Machine: You can rent or purchase a floor scrubbing machine. These machines make the process more efficient, but you can also scrub floors manually.
  2. Detergent or Floor Cleaner: Choose a cleaning solution suitable for your floor type.
  3. Buckets: For mixing the cleaning solution and rinsing mop or scrubbing pads.
  4. Mop or Scrubbing Pads: Depending on the method you choose.
  5. Protective Gear: Wear rubber gloves and, if needed, safety goggles.

Steps for Floor Scrubbing Process :

1.Floor Scrubbing Process Clear the Area:

  • Remove any furniture, rugs, or items from the area you will be scrubbing.

2. Floor Scrubbing Process Sweep or Vacuum:

  • Remove loose dirt, dust, and debris from the floor using a broom or vacuum cleaner.

3.Floor Scrubbing Process Mix Cleaning Solution:

  • Follow the manufacturer’s instructions for the floor cleaner or detergent. Mix it with water in a bucket.

4. Pre-treat Stains (if necessary):

  • If there are stubborn stains, you may want to pre-treat them with a stain remover before starting the scrubbing process.

5. Apply Cleaning Solution:

  • For machine scrubbing: Fill the machine’s tank with the cleaning solution.
  • For manual scrubbing: Dip the mop or scrubbing pad into the cleaning solution and wring out excess liquid.

6. Scrub the Floor:

  • For machine scrubbing: Follow the machine’s instructions. Move the machine in a back-and-forth or circular motion, covering the entire area.
  • For manual scrubbing: Scrub the floor using a circular motion. Apply a bit of pressure to remove stubborn dirt.

7. Focus on High-Traffic Areas:

  • Concentrate on areas that receive more foot traffic or are particularly dirty.

8. Rinse the Floor:

  • For machine scrubbing: If the machine has a separate rinse function, use it to remove any remaining cleaning solution.
  • For manual scrubbing: Rinse the mop or scrubbing pad frequently in clean water to remove dirt and cleaning solution.

9. Allow the Floor to Dry:

  • Let the floor air-dry or use a clean, dry mop or towels to speed up the drying process.

10. Replace Furniture and Rugs:

  • Once the floor is completely dry, place furniture and rugs back in their original positions.


  • Follow the manufacturer’s instructions for your flooring material and the cleaning equipment you are using.
  • Don’t use excessive water, especially on hardwood floors, as it can cause damage.
  • Regular floor scrubbing helps maintain the cleanliness and longevity of your floors.

Always refer to the specific guidelines provided by the manufacturer of your flooring and cleaning equipment for the best results.

Floor Scrrubing in Mumbai 7498540947

Leave a comment